Свържете се с нас
Тел.: +43 732 257700
Щастливи сме да отговорим на въпросите ви>Контакт
PEM® S-RT: the new free-running locknuts
Inside the new type S-RT PEM® self-clinching lock-nuts a specially-optimised thread pitch makes sure of particularly easy screwing processes. The screws can revolve freely in the thread until a specific force is applied. As soon as this is reached, the special geometry of the lock-nut comes into play. The screw is then held firmly over the entire length of the thread – even when exposed to vibration and after being screwed and unscrewed numerous times. Thanks to these properties, the PEM® SR-T is especially suitable for lasting installation in thin aluminium and steel sheet from 0.8 mm thick. The self-clinching lock-nuts are available in sizes from M3 to M6 as well as for a range of different sheet thicknesses.
- Screw turns freely until a clamp load is applied
- Resistant to vibrational loosening
- Back side of panel is flush or sub-flush for screw installation
- Locking feature reusability is not affected by number of on/off cycles
- Uses same mounting hole and installation tooling as standard Stm nut fasteners found in PEM® Bulletin CL
For best results we recommend using a Haeger insertion press for installation of PEM® self-clinching fasteners.
Are you interested and would you like advice from our experts?
We are happy to provide you with advice and assistance and advise you quickly and competently. Please contact us.
> Contact us now